Accessories for filter holders for sample preparation.

Accessories for filter holders for sample preparation.

A prerequisite for successful work with glass filters is the selection of the right porosity. It is important to select a filter whose largest pore size is slightly below the grain size of the smallest particles still to be separated.

Used for general filtration and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe

Accessories for filter holders for sample preparation.

Accessories for filter holders for sample preparation.

Vacuum filter aqueous, organic, or corrosive liquids for particulate contamination analysis.

Designed to collect filtrate directly into a media-style bottle

Used for routine filtration of corrosive liquids and removal of particles from HPLC solvents

Accessories for filter holders for sample preparation.

Designed to replace parts contained in glass vacuum filtration kits or provide for an alternative configuration

For vacuum filtration using 96- and 384-well MultiScreen_HTS, MultiScreen™ Solvinert, and Solvinert Deep Well filter plates

Produced from borosilicate glass and available with a choice of support screen. Whatman™ Vacuum-Type Glass Membrane Holder is suitable for aqueous and organic solvent filtration. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane.

Recommended when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate

Borosilicate glass flask with side arm, No. 2 hose connection.

Recommended for routine filtration analysis of corrosive liquids and the removal of particulates from HPLC solvents

Converts Ultra-Ware filtration assemblies for inline filtration/degassing applications

For 90mm filter

Thermo Scientific™ Nalgene™ filtration hardware and accessories can be used in a wide range of applications and in conjunction with our various lines of filtration devices.

Kimble™ Silicone Stoppers are general purpose single-hole silicone rubber stoppers. They are steam autoclavable and an opaque yellowish-white in color. For use with Kimble™ Kontes™ Filtration Assemblies.

Use Kimble™ Microfiltration Assembly Hardware when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate.

Recommended when filtering viscous or proteinaceous solutions to give the maximum flow rate

Components for Ultra-ware™ microfiltration assembly

Optimize filtration with this PTFE Gasket.

This adapter assembly is designed to allow connection of a 47mm or 90mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread.

For use with ULTRA-WARE™ microfiltration assembly

Designed to handle small volumes of liquids for analysis of particulate or microbiological contamination

Designed for large sample volumes or samples with high particulate loads that would tend to clog a 47mm diameter filter

Designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter